Banner Brackets | Mounting Made Easy


Ball Finial Banner Brackets display banners taut.

If you’re planning an event or advertising campaign, then you know how important it is for your company’s banners to be sturdily installed and visible to anyone walking or driving by. The two most common methods used for banner bracket mounting are wall mounting and pole mounting.

Wall Mounted Banner Brackets

Wall mounting is a technique in which banner brackets are installed directly against a wall, inside or outside. This method makes event banners look like more permanent fixtures. You’ll want to ensure that you have the proper measurements of your banner before installing your outdoor banner brackets, since this form of mounting requires exact precision.

Pole Mounted Banner Brackets

Pole mounting, on the other hand, relies on mounting that wraps around a pole. The best bracket size for pole mounting can be found after the pole is measured with a carpenter’s stone. Banners are then typically designed based on the arm length of pole mounted brackets, since multiple banner pole brackets are typically installed at the same time.

Pole mounted banner bracket install is easy.

With our Ball Finial Banner Brackets, you’ll be able to display banners that are any height, on any flat surface (wall mount). Each order comes with two bracket sets, so you can trust that your banners will be able to withstand rugged weather. Arm length options come in 20, 26, 32, and 38 inches. The two smaller arm lengths come with a 4 inch squared mounting plate, while the two larger arms come with a 6 inch squared mounting plate. The modern matte black finish will look great either indoors or outdoors.

Two-Way Banner Scoll Brackets

Decorative banner brackets are a great choice for upscale or high-end areas.


If you’re in the market for a more decorative piece displaying two messages, then the Two-Way Banner Bracket Set with Scroll Artwork might be your best bet. It’ll add flair to your neighborhood while catching the eye of potential customers. This bracket set is custom-made for each order and comes with three pole options: square poles, round or octagonal poles, or a traditional wall mount. Arm lengths can be 20, 26, or 32 inches. If desired, the scroll artwork that adorns the top arm may also be added to the bottom arm.

The CitySite Banner Bracket Set is definitely free from excess and unnecessary accents, allowing it to blend in seamlessly with street poles. Banners that are 18, 24, 30, or 36 inches wide will fit wonderfully. However, this particular bracket set isn’t as resistant to weather as some of our other models; also, it is designed only for banners under 12 square feet.

No matter what you’re planning, your business will benefit from these banner bracket sets.
They’re easy to mount and are sure to be enjoyed for years to come.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *